NU3884M Single row cylindrical roller bearings

weight (lbs):4.06; joint diameter:2 in; series:J; lubrication for pin & block type:USE LITH-EP-000 GREA; boot kit number:UB200; bore type:Solid; maximum misalignment angle:30 °; finish / coating:Uncoated; material:Steel; joint arrangement:Single Joint;

length through bore:1.500 in; bore type:Round; locking device:Set Screw; radial static load capacity:2540 lbf; housing material:PBT Thermoplastic; d:1.0625 in; lubrication type:Lubrication Fitting; D:3.2500 in; radial dynamic load capacity:4410 lbf; duty type:Standard Duty;

radial dynamic load capacity:9752 lb; series:ER; finish/coating:Uncoated; outer ring width:1.1875 in; bearing material:52100/Black Oxi; manufacturer catalog number:701079; expansion type:Non-Expansion Bearin; locking device:Set Screw Collar; duty type:Standard Duty; d:2.0000 in;

ball material:Alloy Steel - heat t; ball width:.8750 in; shank thread length:1.7190 in; axial static load capacity:2320 lb; housing material:4130 Alloy Steel - h; d:0.7500 in; grade:Precision Extra Capa; thread direction:Right Hand; race material:Carbon Steel - corro; lubrication type:No Fitting;

closure type:Double Shielded; inner ring width:16 mm; d:30 mm; snap ring included:Without Snap Ring; D:62 mm; precision rating:ABEC 1; cage material:Steel; B:16 mm; manufacturer upc number:087796293205; bore type:Round;

closure type:Double Sealed; B:0.2500 in; d:2.0000 in; manufacturer upc number:662729463902; internal clearance:C0; D:2.5000 in;

B1:44.3 mm; SW:3.18 mm; C:17 mm; d1:37.4 mm; T max.:200 °C; m:5 mm; D:52 mm; B:34.8 mm; B2:13.5 mm; Weight:0.25 kg;

bore type:Round; d:4.0000 in;

db min:12.5 mm; Characteristic cage frequency, FTF:0.43 Hz; a:7 mm; Precision class:P4S; D1:18.25 mm; D:22 mm; Radial rigidity:79 N/µm; d1:13.6 mm; Mass:0.01 kg; Brand:SNR;

finish/coating:Powder Coated; D:12 to 13 in; housing material:Cast Iron; bore type:Round; base to bore centerline:4.2500 in; B:6-1/4 in; bearing type:Spherical Roller; d:3.9375 in; lubrication type:Lubrication Fitting; locking device:Double Concentric Co;

Min operating temperature, Tmin:-40 °C; a:29.1 mm; Characteristic outer ring frequency, BPF0:19.86 Hz; Max operating temperature, Tmax:120 °C; e:0.35; Nlim (grease):1,800 rpm; Static load, C0:259 kN; Y0:0.95; r1a max:1.5 mm; d:133.35 mm;

lubrication type:Lubrication Fitting; standards met:UL, AFBMA, AGMA, ASM; manufacturer catalog number:068215; maximum rpm:5000 RPM; D:5.8400 in; series:209; mounting type:Two-Bolt Flange; bore type:Round; radial static load capacity:4906 lb; d:1.7500 in;

maximum shaft surface speed:12000 fpm; misalignment tolerance:0.020 in; weight:0.92 lb; manufacturer catalog number:29619-1322; pressure tolerance:Ambient; continuous temperature range:-22 to 400°F; lip material:Labyrinth; harmonization code:8487900040.US; width:0.6250 in; construction descripti

series:XLS; contact angle:15 °; maximum rpm:7300 RPM; B:0.6875 in; precision rating:Not Rated; radial static load capacity:8770 lbf; internal clearance:C0; closure type:Open; d:2.7500 in; radial dynamic load capacity:9510 lbf;

overall length:35-1/2 in; rod diameter:3/4 in; bottom type:Channel Bottom; maximum travel:19-1/2 in; D:33-1/2 in; height to center line:3-15/16 in; finish/coating:Uncoated; series:TPHU; base width:3-1/2 in; travel:18 in;